POWER PAK II / PLUS II
9
7. Power Supply for Your 12V DC Products
1. Connect the 12V DC Female Adaptor (18) into the 12V DC 10A Output Port (3).
2. Connect the other end of the 12V DC Female Adaptor (18) into your chosen 12V DC vehicle accessory (fig 7).
3. Turn the POWER PAK II ON the by pressing the ON/OFF/TEST button (1).
4. Once you have finished using your 12V DC accessory, remove the 12V DC Female Adaptor (18) from your accessory and
the POWER PAK II.
Note: Running time of the your device will vary depending on the devices input requirements & charge status of
the POWER PAK II.
Please note that the POWER PAK II is only meant to operate small low amperage accessories, not items such as in
vehicle refrigerators, winches etc.
8. LED Torch/Emergency Light
1. Press and hold the ON/OFF/TEST button (1) for approx. 3 seconds to turn ON the LED Torch/Emergency Light (5).
2. To change to the STROBE LED mode, press the ON/OFF/TEST Button (1) once.
3. To change to the SOS LED mode press the ON/OFF/TEST Button (1) once again.
4. Turn OFF the LED Torch/Emergency Light (5) feature by pressing the ON/OFF/TEST Button (1) again.
Composition and amount of toxic and harmful substance in POWER PAK II
O : Indicate all homogeneous materials hazardous substances content are below the MCV limit specified in the
Standard 2002/95/EC (RoHs).
Pb
O
Hg
O
Cd
O
Cr(Vi)
O
PBB
O
PBDE
O
(fig 7)
