6
PORTABLE CLAMPING STAND
5) Folding The Portable Clamping Stand For Storage
1. Fold in the clamp foot pedal (8) by releasing the foot pedal folding release lever (7) (fig 19a), then fold the
clamp foot pedal (8) inwards until the clamp foot pedal (8) is flat against the body of the portable clamping stand (fig 19b).
2. Loosen the folding rear leg (5) by rotating the rear leg release knob (4) in an anti-clockwise direction (fig 20a).
3. Pull the leg out of the leg securing slot (fig 20b).
4. Fold the leg down onto the portable clamping stand (fig 20c) then locate the leg tip into the front leg securing slot (fig 20d).
5. Tighten the rear leg release knob (4) in a clockwise direction until the knob is tight but DO NOT over tighten.
6. Release the folding front legs (6) by pulling the front leg release locks (9) towards the leg foot (fig 21) and then fold the legs
towards the portable clamping stand.
7. Your portable clamping stand is now folded down and ready to store (fig 22).
(fig 19a)
(fig 19b)
(fig 20a)
(fig 20b)
(fig 20c)
(fig 20d)
(fig 20e)
(fig 21)
(fig 22)
