3
PORTABLE CLAMPING STAND
Portable Clamping Stand User Instructions
Congratulations on purchasing your Kincrome KP1102 Portable Clamping Stand. The KP1102 will enable you to safely hold and
secure all of your materials or products when you need to work on them. Please thoroughly read and understand all safety and
user installation instructions prior to assembly and use of the clamping stand. Please take time to familiarize yourself with
the weight limitations of the product to ensure the clamping stand does not become overloaded as this could compromise
the structural integrity of the product or cause personal injury. Always ensure you place your clamping stand on a sound level
surface where all three legs are touching the ground prior to use.
1) Portable Clamping Stand Assembly
Remove the portable clamping stand from the box and dispose of all the packaging materials thoughtfully and as per your
local council guidelines.
1. Place the portable clamping stand on a sound level surface or workbench with the legs of the stand facing upwards.
2. Unfold the folding rear leg (5) by rotating the rear leg release knob (4) in an anti-clockwise direction (fig1).
3. Slide the folding rear leg (5) towards the rear leg release knob (4) (fig 2a) to release the leg from the leg securing slot
(fig 2b) on the underside of the front of the portable clamping stand.
4. Lift the folding rear leg (5) slightly until the leg is above the securing slot, slide the leg forward (fig 3a) and then lift the leg
(fig 3b). Push the leg down until it locates in the rear securing slot of the portable clamping stand (fig 3c).
5. Tighten the rear leg release knob (4) in a clockwise direction until the knob is tight but DO NOT over tighten.
(fig 1)
(fig 2a)
(fig 2b)
(fig 3a)
(fig 3b)
(fig 3c)
