kincrome K16003, Owner'S Manual

Page: 20 / 25

Storage
20
Prepare the regulator for end-of-season storage by running antifreeze through the system. This will
keep internal parts lubricated, protect against corrosion, and keep the unit from freezing.
CAUTION
The regulator may be damaged if it freezes.
Protect the regulator from freezing during storage by following the instructions below.
Preparing for storage:
1. Add antifreeze
Pour antifreeze into the pump system.
Some antifreeze contain Ethanol (which is alcohol based and highly
flammable.) which should not be used.
2. Spray briefly Turn on the pump and run the pump system briefly until fluid sprays.
Removing from storage:
1. Drain Drain the antifreeze left in the pump system into a suitable container.
2. Flush with
water
Fill the pump system with fresh water and run through the system. Operate
the pump system until the system is completely flushed. Be sure to set up
containers to capture the antifreeze flush water.
3. Disposal Dispose of the antifreeze and flush water properly.