kincrome K13255, Manual

Page: 4 / 8

3
INDUSTRIAL HAMMER CHISEL KIT 8 PCE
4) Service
a. Tool service must be performed only by qualified repair personnel.
b. When servicing a tool, use only identical replacement parts. Use only authorized parts.
c. Use only the lubricants specified by the manufacturer.
5) Additional Safety Warnings
a. The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may
occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.
b. Only use with accessories rated to handle the forces exerted by this tool during operation. Other accessories not
designed for the forces generated may break and forcefully launch pieces.
c. Attach all accessories properly to the tool before connecting the air supply. A loose accessory may detach or
break during operation.
d. Thoroughly read and understand the manual for the air compressor used to power this tool.
e. Use this tool with both hands only. Using tools with only one hand can result in loss of control.
f. Do not lay the tool down until it has come to a complete stop.
Moving parts can grab the surface and pull the tool out of your
control.
g. Do not force the tool. Use a larger one if needed.
h. Anyone using vibrating tools regularly, or for an extended period should first be examined by a doctor and then have
regular medical check-ups to ensure medical problems are not being caused or worsened from use. Pregnant women
or people who have impaired blood circulation to the hand, past hand injuries, nervous system disorders, diabetes, or
Raynaud’s Disease should not use this tool. If you feel any symptoms related to vibration (such as tingling, numbness, and
white or blue fingers), immediantly discontinue use and seek medical advice as soon as possible.
i. Do not smoke during use. Nicotine reduces the blood supply to the hands and fingers, increasing the risk of vibration-related injury.
j. Wear suitable gloves to reduce the vibration effects on the user.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities,
contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement or other masonry products
• Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles.
6) Description of Symbols
The following symbols could be shown on the tool:
Read the instruction manual before use. Risk of Explosion
Wear Ear Protection Wear Eye Protection
no
No-load speed, Free Speed
CFM
Cubic Feet per Minute flow
.../min, RPM
Revolutions or reciprocation per minute
SCFM
Cubic Feet per Minute flow at
standard conditions
PSI
Pounds per square inch of pressure
NPT
National pipe thread, tapered
ft-lb
Foot-pounds of torque
BPM
Beats/ Blows per minute
Nm
Newton meters of force
BSP
British Standard Pipe