kincrome K12300, Owner'S Assembly And Operating Manual

Page: 3 / 8

IMPORTANT SAFETY INFORMATION
The use of a Scissor Lift Table has inherent dangers; to avoid risk of personal injury or property damage
make sure you are fully aware of the operating instructions for this product, the recommendations in this
manual cannot cover all eventualities. This tool is designed and intended for use by properly trained and
experienced personnel. If you are not familiar with the proper and safe operation of a Scissor Lift Table, do
not use until proper training and knowledge has been obtained.
Do not exceed working load limit of this Scissor Lift Table. This Scissor Lift Table intended for materials
handling. Never carry people or allow persons to stand on the lifting table. Do not use for any other purpose
accept those listed in this manual.
General Safety Instructions
To operate this appliance safely, the user must have read and understood these instructions before using this
appliance.
This appliance is not intended for the use by persons (including children with a reduced physical
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instructions concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure they do not play with the appliance.
1. Do not exceed listed weight capacity. Be aware of dynamic loading! Sudden load movement may
briefly create excess load causing product failure.
2. Lock Casters when unattended.
3. Be aware of pinch points. Keep hands and feet clear of the lifting mechanism during operation. The
Scissor Arm Assembly can cause serious injury when opening or closing. Do not allow anyone near
the Scissor Arm Assembly during operation.
4. Use only on a flat, stable, hard surface.
5. Do not make any alterations to this product.
6. Keep clear of load while lifting and lowering.
7. Always lower load slowly.
8. Inspect Scissor lift table before every use; do not use if parts are loose or damaged.
9. Before the first use, check hydraulic fluid level and fill to the top of the fill port as described in
maintenance section. Place the Table Assembly on a flat surface which is well lit and safe for
assembly. Thoroughly test the Lift Table for proper operation.
3.