height to ensure the plate is parallel.
Handle - Handle Wrench
With the jack sitting on the jacking plate place the jack handle
wrench over release valve. Turn handle slowly clockwise until
firm DO NOT over tighten. Remove handle from release valve
and slide handle into handle base on jack.
Testing Handle Operation
Briefly test press operation as follows BEFORE using. With handle on the release valve turning clockwise or
counter clock wise allows jack to be raised apply pressure and lowered reduce pressure. To raise jack, twist
handle clockwise until it is firm. Do not force or tighten beyond this point. Take handle from release valve
and place in handle sleeve, Pump handle a few times to raise jack about halfway. If jack does not begin to
rise after a few pumps, check to make sure the release valve is tight. With jack raised, place handle on
release valve twist handle slowly counterclockwise to lower jack. A normal hissing sound may be heard as
jack lowers and pressure in hydraulic cylinder is released.