Kinco 3M2280N, User Manual

Page: 32 / 34

User Manual
14
Chapter 4 FAQ
4.1 Indications of Driver Indicators
N series stepper motor drivers are equipped with complete protection circuits to protect their
safety to the greatest extent possible. In addition, the rich indications of indicators help the
user to learn the working status of the driver in time.
Indications of Indicators:
Alarm
Indicator
Motor Status
Power Run Error Chop
Internal power
failure Off Off Off Off The motor power supply
disconnects and the motor
shaft releases
Single-chip
microcomputer
resetting On On On On The motor power supply
disconnects and the motor
shaft releases
Hardware error On Off On On The motor power supply
disconnects and the motor
shaft releases
Motor
phase-to-phase
error On Off On Blink
quickly The motor power supply
disconnects and the motor
shaft releases
Over-current
alarm On Off Blink
quickly Off The motor power supply
disconnects and the motor
shaft releases
Over-voltage
alarm On Off Blink
quickly Blink
quickly The motor power supply
disconnects and the motor
shaft releases
Overheat alarm On Off Blink
slowly Off The motor power supply
disconnects and the motor
shaft releases
Under-voltage
alarm On Off On Off The motor power supply
disconnects and the motor
shaft releases
DIP switch error On Blink
slowly On Off The motor power supply
disconnects and the motor
shaft releases
Motor cable not
connected On Off On Blink
slowly The motor power supply
disconnects and the motor
shaft releases
Normal running On On Off Off The motor runs normally
Test running On Blink
slowly Off Off The motor runs normally
Braking On On Off On The motor runs normally