16 Ports / 32 Ports / 64 Ports
User M
anual
12
/
51
Notice:
1. Power interface 1 and 2 should be connected to AC 100-240V 50-60HZ. To use the two power
supplies, make sure both power interface 1 and 2 are connected to the power and turn on the power
switch. The power LED is orange-yellow when two power supplies are powered up.
Front panel power LED status
Power Interface status
Power LED
status
Both power interface 1 and 2 are powered up
yellow
Power interface 1 is powered up and power interface 2 is not
powered up
Red
Power interface 1 is not powered up and power interface 2 is
powered up
Green
Both power interface 1 and 2 are not powered up
No ligKVM
2. CAT5, CAT5e and CAT6 cables are required to connect to the RJ45 ports.
3. Turn on the power switch after power cables are connected, the unit is powered up and ready to
operate.
