Kimo mp210, User Manual

Page: 22 / 28

8. Setting of measurement parameters
The instrument is on.
➢
Go to “Measurement” menu with the arrow keys and press OK .
➢
Select the measurement to set with the arrow keys.
➢
Press the function key
“Params”
.
The different parameters are displayed.
➢
For all probes and modules, it is possible to modify the channel number.
➢
Select “Channels” with the arrow keys and press OK .
➢
Select “Channel num.” and press OK .
Select a channel number for the parameter, and press OK . This number defines the order display of the
parameters.
8.1 Pressure module
8.1.1 Unit
Pressure :
➢
Go to the line “Pressure” and press OK .
➢
Select with the arrow keys the required unit : Pa, daPa, mmH
2
0, mmHg, mbar, hPa, inWg or kPa.
➢
Press OK to validate the unit selection.
Temperature :
➢
Go to the line “Temperature” and press OK .
➢
Select with the arrow keys the required unit : °C or °F
➢
Press OK to validate the unit selection.
Airflow :
➢
Go to the line “Airflow” and press OK .
➢
Select with the arrow keys the required unit : m 3 /h, L/s, cfm or m 3 /s
➢
Press OK to validate the unit selection.
Air velocity :
➢
Go to the line “Air velocity” and press OK .
➢
Select with the arrow keys the required unit : m/s, fpm, km/h or mph.
➢
Press OK to validate the unit selection.
8.1.2 Type
Temperature :
➢
Select “Type Tc” with arrow keys and press OK.
➢
Select the required type of thermocouple : K, T, J or S
➢
Press OK to validate.
8.1.3 Normative value
Allows to calculate the instantaneous airflow in standardized temperature and atmospheric pressure conditions.
Airflow :
➢
Go to the line
“Normo values”
and press
OK.
➢
Select
None
,
DIN1343
(temperature : 0°C, Atmospheric pressure : 1013.25 hPa) or
ISO2533
(temperature : 15°C,
Atmospheric pressure : 1013.25 hPa) and press OK.
22
Setting of measurement parameters