Kimo mp210, User Manual

Page: 20 / 28

➢
Select the letters with arrow keys then press OK .
To go from the lower case keypad to the upper case keypad then to the numeric keypad : press the function key :
To delete a letter press the function key
“Delete” .
➢
Press the function key
“Validate”
to validate the name.
The recap of the Point/Point average is displayed.
➢
Press OK to display the graph.
➢
Press the function key “Zoom+” to display the detail of the calculated points .
➢
Press Esc key to back to the dataset screen.
➢
Press the function key “Print” to print the dataset.
Printing mode is displayed.
➢
Go to the line
“Channels info”
and press
OK
to print the channels on the printing ticket.
➢
Go to the line
“Details”
and press
OK
to print details of the dataset on the printing ticket.
➢
Press the function key
“Validate”
to print.
The instrument backs to the Point/point average display.
➢
Press Esc to back to “Measurement” menu.
7.2.2 Automatic average
This function allows to calculate an average value that the device measured in an interval chosen time.
➢
Go to “Automatic” line in the “ Averages” menu and press OK .
➢
Press the function key “Start” to start the measurement.
Duration is displayed.
➢
Press the function key “Stop” to stop the measurements.
Measurements, average, minimum and maximum values, standard deviation and duration are displayed.
➢
Press the function key “Start” to launch a new automatic average.
➢
Press the function key “Save” to save the results.
A keypad is displayed on the bottom of the screen.
➢
Select the letters with arrow keys then press
OK
.
To go from the lower case keypad to the upper case keypad then to the numeric keypad : press the function key :
To delete a letter press the function key
“Delete” .
➢
Press the function key “Validate” to validate the name.
The recap of the automatic average is displayed..
➢
Press OK to display the graph.
➢
Press the function key “Zoom+” to display the detail of the calculated points .
➢
Press Esc key to back to the dataset screen.
➢
Press the function key “Print” to print the dataset.
Printing mode is displayed.
➢
Go to the line “Channels info” and press OK to print the channels on the printing ticket.
➢
Go to the line “Details” and press OK to print details of the dataset on the printing ticket.
➢
Press the function key “Validate” to print.
The instrument backs to the automatic average display.
➢
Press Esc to back to “Measurement” menu.
7.2.3 Automatic Point/Point average
This function allows to calculate the average value of various points, calculated themselves on a duration beforehand
defined.
➢
Go to “Auto Pt/Pt” line in the “ Averages” menu and press OK .
A duration is displayed on the bottom right of the screen.
➢
Press the function key “Duration” to modify the duration if necessary.
➢
Go to “min” with the arrow keys then press OK , set the duration with arrow keys then press OK .
➢
Perform the same procedure for the seconds.
20
Start and record datasets