4 Settings
From the key a screen lists the different settings or informations about the instrument.
To have access to one of those screens, scroll with the scrolling knob key and validate with OK key.
To quit each screen and back to main menu, use key.
4.1 Configuration
This screen allows configuration for some functions. To have access to those functions :
Press key then choose CONFIGURATION with the scrolling knob key and OK key to validate.
From this screen, use arrow keys to move the cursor in the desired area and modify with the scrolling knob key the proposition. Various
parameters to adjust are :
•
Run : systematic measurement mode when starting the device : L, L-St, L-Leq, Leq-St or S1+S2.
•
Lang. : user language : French or English.
•
Bip : the presence or absence of tone when pressing on the keyboard. The beep disappears by itself if it interferes with the
measurement.
•
Date / Hour : Set date and time
To return to main screen, press .
4.2 I/O
The I/O input/output allows to connect 2.5 mm jacks. It is located at the bottom of the unit behind the rubber breastplate.
I/O 1 corresponds to input for the launch and stop measurement from an industrial controller and is for measurement modes L-St, L-
Leq and Leq-St. Launching of the measurement is made for a continuous high level and stopping the measurement is made for a
continuous low level.
I / O 1 also corresponds to the detection output compared to a preset sound level and is for all modes of measurement. A high level
appears in output when the value of the acoustic pressure level reaches and exceeds a certain value.
For this type of output following items must be configured :
•
The level type: choose L, Leq or LPK depending on the mode of measurement.
Settings
8
Menu
Menu
Configuration
