E3 :
this screen reminds the general format of the session of measurement:
•
Date of measurement start
•
Date of measurement end : not entered because measurement is still ongoing.
•
Measurement time :
not entered because measurement is still ongoing.
•
Measurement mode : L-Leq
•
Frequency weighting for L and Leq : Weig.
•
Time weighting for L : Cst
•
Integration time for Leq : S/S (Start/ Stop mode)
•
Frequency weighting of the level of pressure peak for L : Lpk
5.3.4 Stop the measurement
We stopped the measurement manually through the pictogram.
Note :
The
manual
command (Start - Stop) has priority over the
I/O
command (even if the initial choice is a start from the
I/O
command).
The pause function is inoperative.
5.3.5 Store data
At the end of the measurement, in manual mode, a screen of all results is displayed. It is then possible to :
➢
Accept measurements and store them : move the cursor on Sto. and press once on OK key to confirm. A banner displays the
storage phase.
➢
Reject measurements and not store them : move the cursor on
RST
and press
twice
on OK key to confirm. A banner displays
the phase of suppression of data.
Make some measurements
14
Screen 3
Ongoing
measurement
Results
Storage
Ongoing
measurement
Results
RST active
Deletion
