➢
Press
Up
key then press
OK
to enter in the
“F 531”
folder corresponding to the offset of the second parameter.
The first number of the offset blinks.
➢
Enter with
Up
and
Down
keys the number value or the negative sign of the value then press
OK
.
The second number blinks
➢
Enter with
Up
and
Down
keys its value then press
OK
.
➢
Repeat the procedure for the following numbers.
➢
Press
OK
when the last number is set.
“F 531”
blinks, the offset for the main parameter is configured.
The unit of the offset is set by default and can not be modified. If this unit is not the same than
the unit of measurement, a conversion must be done.
20
F 500: MEASUREMENT SETTINGS
