Kimex SLIM 055-0064W, User Manual

Page: 11 / 18

Guidance for Installation:
Steps ：① Take off the decorative panel(show as Pic.1) ② Fixed the installation plate to the real ceiling
by screws.(The distance between the screws are 470x337MM, show as Pic.1) ③ Install the projector to the
lift(Show as Pic.2) ④ Install the decorative panel(Show as Pic.3) ⑤ Fix the wires of projector through
the ring.(Show as Pic.3)
Manual for product.
1
、
The adjustment of upper and lower limit
：
（
1
）
Upper limit switch: Adjust the limit switch by wand, anti-clockwise, the lift will descend; clockwise, the lift will ascend.
（
2Lower limit switch: Adjust the limit switch by wand, anti-clockwise, the lift will ascend; clockwise, the lift will descend.
Note
： （
1
）
The distance for half-circle fine-tuning adjustment is about 10MM
（
Formula
：
Loop*20MM
）
（
2
）
Speed of the Motor: About 21mm/s
3
Pic.3
M6 Screw
（
4PCS
）
M6 Nut
（
4PCS
）
Rings for wire
图一
Real Ceiling
M8 Screw
（
4PCS
）
Pic. 2
M6 Screw
（
4PCS
）
336.5
470
Pic. 1
Asc
end
Des
cend
wand
Upper Limit
Lower Limit
Limit Switch