2
Technical informations
Installation
Voltage
:
100V – 120V, 60Hz
o
r
220V – 240V, 50Hz
Con
sumption
:
130W (Max)
0,4W (
sleep mode
)
I
nstall the screen in a location easily accessible to all viewers. Ideally, the center of
the screen, when fully unrolled, should be at the level of the viewers' eyes (lower
third of the canvas).
We advise you to put the bottom of the image between 80 and
120cm.
The screen can be screwed to a wall or a ceiling, or hung from the ceiling via
hooks.
If necessary, be sure to obtain suitable screws, wall plugs and hooks. (For a wooden
surface, for example Ø4x50mm screws, for a concrete or stone surface, Ø 6x50mm
screws and dowels)
Ceiling fixing (through eyelets)
Place the eyelets on the screen and measure the gap between the eyelets, and mark
those measurements on the ceiling. Then, drill the holes thus marked, and add the
dowels if necessary and finally the hooks. Finally, hang up the screen.
