Receiver / remote control reprogramming
If your remote is not working, there are two possible causes for this
problem:
Either the battery is worn out or defective. It must therefore be
replaced (light off).
Either your remote control is deprogrammed and you must therefore
reprogram (light on).
For it :
- press the S4 button once
reprogramming (see diagram
opposite) located inside the wall box.
- finally, press the "UP" button on the
remote control.
This manipulation allows you to put the remote control and
the receiver back on the same frequency.
Don't touch the canvas with
you hands
Do not use chemicals or detergent for the
canvas
Do not write or draw on
the canvas
Do not disassemble the crankcase
Use water and a soft
cloth to clean the
crankcase
To clean the canvas, use a soft
cloth with clear or slightly soapy
water
Maintenance advice
