BioMax2 / KBio2-Online
Installation and Programming Manual
Page
62 of 91
Function: It returns a byte, showing the status of the four digital inputs (0 to 3). If the bit
is at 0, the input is in open circuit. If the bit is at 1, the input is shorted to GND.
If bit 4 of the
CFG_ECHO
is enabled (see
), the
BioMax2 / KBio2-
Online
electronics can notify of the change in the digital input status via an event with
the same OpCode.
9.6.17. Multiread filter status
Event
OP
0x60
NA
0x0001
ARG
Bit 0: Status of DIN 0
Bit 1: Status of DIN 1
Bit 2: Status of DIN 2
Bit 3: Status of DIN 3
Instruction
OP
0x61
NA
0x0001
ARG
Byte 1:
0: Status of UART_0 (only if it is configured as serial reader)
1: Status of UART_1 (only if it is configured as serial reader)
2: Status of TTL_0
3: Status of TTL_1
Response
OP
0x61
NA
0x0001 or >0x0001
ARG
Byte 1: port from which the status is announced
Bytes 2 to <NA>: Code of the present card
