Centauri Energy Server
–
User Manual
Model Number - GF-20000-360Vdc-380Vac-3/3
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. |
36
The PV and the rectifier will supply the power to the load and the battery.
•
Limited current charging:
During the set time, the rectifier conducts the limited current charging.
5.5.2.4 Protocol Setup:
The protocol setup refers to the setup of 485 communication protocol, including three setup options
as follows:
1)
Address: It is 1 by default.
2)
Baud rate: It is 2400 by default.
3)
Calibration: no
5.5.2.5 Language Selection:
The menu and data on the touch screen can be indicated in Chinese and English. The system will
enter the “USER” interface by clicking the “
”
setup icon on the main interface, Click the
“LANGUAGE” button to select the desired language.
5.5.2.6 Setup of Date and Time:
The system will enter the “USER” interface by clicking the “
”
setup icon on the main interface, click
the
“Date/time” button to set the current time and date
of the Energy Server.
5.5.2.7 Setup of Date Format:
The date can be displayed in the following two formats by setting
“
DATE FOR
”
.
1)
Year/Month/Day
2)
Month/Day/Year
5.5.2.8 User Password/Control Password:
The system has password protection feature to secure the important control operations. The default
password is
“
87654321
”
. When the password is enabled, the test of the Energy Server and the battery
cannot be conducted until entering the password and confirming it.
5.5.2.9 Touch Screen Calibration:
The touch screen calibration
“
CALIB
”
is used to calibrate the center of the screen, that is, when the
system factory settings are restored, it is necessary to calibrate the touch screen and during the
calibration of the touch screen, please click the cross center of the screen according to the prompt.
