Kilowatt Labs CENTAURI ENERGY SERVER, User Manual

Page: 16 / 47

Centauri Energy Server – User Manual Model Number - GF-20000-360Vdc-380Vac-3/3
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. | www.kilowattlabs.com
16
Table 3 Description of selection Buttons
•
Click the “ ” button on any interface to switch to the button control mode, and then press the
“ ” button to return to the touch screen control mode.
•
After clicking “ ” button, the user can move the cursor through pressing “ ” or “ ” button
to choose the required control button and then press the “ ” button for confirmation.
3.4.2 Description of Function Buttons:
Button Symbols Name Functions
INV ON ON button
When this button is pressed, the system
executes the boot command and then runs
after pressing the “OK” button.
INV OFF OFF button
When this button is pressed, the system
executes the shutdown command and the
shutdown operation is effective by pressing the
“OK” button. At this moment, the system and
the output shut down.
SILENCE ON/OFF Beep ON/OFF
The system alarm is cancelled or activated by
pressing this button.
FAULT CLEAR
Clear the system
fault
Press this button to clear executed abnormal
protection command, the system will restart
and run.
EPO Emergency stop
When this button is pressed, the system
immediately put an end to the power supply.
Table 4 Description of Function Buttons