Sirius Capacitor Module
10
User Manual - 7.1kWh48VDC Module
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. |
www.kilowattlabs.com
Shut-down due to Safety Events:
•
Over-voltage cut off
: This feature will be activated when the module voltage goes beyond
the high voltage threshold of 56V.
•
Under-voltage cut off
: This feature will be activated when the module voltage goes below
the low voltage threshold of 44V.
•
Over-current cut off
: This feature will be activated when the module current exceeds the
maximum load capacity of 296A.
•
Over temperature cut off
: This feature will be activated when the module temperature
exceeds the maximum temperature limit of 75
̊
C.
These features work as follows:
Disconnect Event
Disconnect Value
Reconnect Feature
Over voltage
56.0V
Module senses system voltage and reconnects
automatically when system voltage is
≤
54.0V
Under voltage
44.0V
Module senses system voltage and reconnects
automatically when system voltage is
≥
46.0V
Over Current
296A
Module senses system voltage and reconnects if V-
system <> +-1V from Vbat@ rest
Disconnected from DC
power source
Poles removed
Enter password through PC to reconnect
Operation Procedures
The module should only be operated within the specified voltage and temperature ratings.
Observe polarity indicated on module. Do not reverse polarity. Follow the steps below while
operating the module.
