Power on the scale: When the scale is off, press ON / OFF to turn it on;
Power off the scale: When the scale is on, press ON / OFF to turn it off;
ZERO: When the weight is stable and within the zero range (2% FS), press the ZERO key to set
the new zero point.
When the weight superceeds the zero range, press the ZERO key to tare the weight.
Symbol Definitions and Troubleshotting
0
The zero point is higher than the setting range.
0
The zero point is lower than the setting range.
AD
Signal to ADC is higher than the setting range.
AD
Signal to ADC is lower than the setting range.
The weight is higher than the upper limitation, or the
display data is over limitation.
The weight is below the lower limitation.
EEP.E1
The parameters CONFIG or CAL are not correctly set.
EEP.E2
USER parameter is not correctly set.
CAP.- - -
Capacity will be the next displaying content.
CAP.ER
Capacity parameters are not correct.
OFF
Power OFF the indicator.
KPOS 1530, 851508, Page 7 of 9
Operation
