KPOS 1530, 851508, Page 2 of 9
Introduction
Thank you for choosing a Kilotech Scale. We appreciate your business and hope that you will enjoy using your
scale. Should you require Technical Support, please contact your local dealer from whom you have purchased.
Our own Technical Service Department can be reached at 800-694-4445 ext.6023 (Canada) or 877-328-5988 ext
6023 (USA). Happy Weighing!
Avoid lengthy exposure to heat or cold.
Allow the scale to acclimate to normal room temperature
before use.
Allow sufficient warm up time.
Turn the scale on and wait for a few minutes to allow the
internal components a chance to stabilize before weighing.
Do not leave a load or weight on a scale for a prolonged
period of time.
Do not tamper with the scale yourself.
This will void the warranty. Contact your local distributor or
Kilotech directly to properly repair your scale.
Do not dissemble the scale yourself.
This will void the warranty. Contact your local distributor or
Kilotech directly to properly repair your scale.
Do not overload beyond the maximum weight limit.
Do not pull the plug by its cord when unplugging.
Do not use the scale near fire or corrosive gas.
Unless the scale is waterproof do not spill water or immerse
in water.
Avoid placing the scale near a heater.
It could cause a fluctuation to the indicator reading.
Always make sure to use a Kilotech approved adapter.
Do not drop the scale or apply a sudden shock.
Do not drag the scale.
Avoid exposing to other electromagnetic devices.
These devices emit RF and can cause unstable readings. If
your scale should perform poorly, try moving the scale to a
different room or location.
Level the scale or make sure it is on an even surface.
A scale used on an uneven surface may provide an unstable
reading.
Scale should be used within stated temperature
& humidity limits.
General Precautions
