| Advanced tools |
51
SMART Monitor
KillDisk also supports displaying SMART information pertaining to the disks it sees. This is done simply by
navigating to the file menu bar and selecting
Tools
>
Open SMART Monitor
. This will open the SMART Monitor
window shown below.
Figure 37: KillDisk's SMART monitor
SMART Information
The SMART Monitor displays a list of all discovered disks and shows the SMART information next to them in table
format. The following SMART information is shown as separate columns:
• Display name
• Device model
• Serial number
• Firmware version
• Raw read error rate
• Reallocated sector count
• Spinup retry count
• Command timeout
• Reallocated Event Count
• Current Pending Sector
• Reported Uncorrect
• Soft Read Error Rate
• Read Error Retry Rate
Configurable settings
In the settings tab, these are the parameters that can be configured:
Monitored disks
Here you have the option to either display
all disks
seen by the system, or only the
active
(processing) disks.
