Maintenance and Inspection :
1. The controller must be operated in top condition, one day working hour must be not
more than eight hours.
2. Please note don’t let the controller get over heated, every minute use 10~15 screws to
operate.
3. The frequency use of this electric screw driver is over eight hours a day, still it needs
periodically testing and treatment. Every 5-6 months.
1. The use of other than genuine KILEWS replacement parts may Result in decreased
tool performance and increased maintenance, and may invalidate all warranties.
2. All repairs and maintenance of this tool and its word must be performed by an
authorized service center.
3. KILEWS is not responsible for customer modification of tools for applications on which
KILEWS was not consulted.
4. Repairs should by made only by authorized, trained personnel. Consult your nearest
KILEWS authorized service center.
5. It is the responsibility of the employer to place the information in this manual into the
hands of the operator.
DO NOT ATTEMPT TO REPAIR THIS EQUIPMENT
All repairs and maintenance of the Controller and its cord
must be performed by authorized service center
SAVE THESE INSTRUCTIONS
DO NOT DESTROY
7. Servicing
CAUTION
CAUTION
