1. Please read the operating manual thoroughly and comply with safety regulation to
operate this Multi-Function Controller.
2. Please grasp the plug of power cord while plugging in or out the plugs of connecting
cord of Electric Screwdriver and power cord.
3. Please fix the power controller to avoid any danger of pulling and dragging the power
cord.
4. Do not near oil, chemical materials or heated objects, also please be alert not to
scratch the power cord by sharp object.
5. This type of Controller can only be applied to Kilews Electric Screwdriver with Counter.
Do not use Electric Screwdriver Controller on other types of machinery.
6. In case of the Controller is overheated or overloaded with maximum current rating of
fuse, the high-speed fuse will be melt down and cut off the power. If the Controller
continues to jump off or has an abnormal switching reaction, please stop the operation
immediately and send back the Controller for repair.
7. When Electric Screwdriver is running, if slides Forward/Reverse Switch instantly,
device will generate the protection program to force Electric Screwdriver stop.
8. Please do not disassemble Electric Screwdriver casually and try to repair it by self.
9. When Controller is not in use, please turn the main power switch OFF and unplug the
power.
WARNING
！
DO NOT OPERATE THIS TOOL WITHOUT
PROTECTIVE EARTH CONNECTED
The tool should be grounded while in use to protect the operator from electric shock. The
tool is equipped with a three-conductor cord and three-prong grounding-type plug to fit the
proper grounding-type receptacle. The green (or green and yellow) conductor in the cord is
the grounding wire. Never connect the green (or green and yellow) wire to a live terminal.
Green and yellow----- Earth
Blue ------ Neutral
Brown ------ Live
1. Use the controller voltage recommended in the specification of this manul.
2. When using a commercial power supply be sure to set up circuit and safety breakers.
You must also properly ground the mechanisms.
3. The temperature and humidity should be kept at appropriate levels.
4. Do not set up the power supply in a room that has poor ventilation and where it may be
exposed to dust and metallic flakes.
3. Grounding Instructions
4. Installation Instructions
2. Operations Cautions
