Kikusui PWX1500H, User Manual

Page: 7 / 131

PWX
7
Search by Topic
Troubleshooting
See “Troubleshooting” on page 124.
• I want to check the accessories. → See “Checking the Package Contents”
or the included packing list.
p.2
• The installation space is limited, so I want
to check the installation conditions.
→
See the included “Safety Precautions”
document, or the electronic version of
the document on the CD-ROM.
–
• How do I connect the AC power supply?
→
“Connecting the Power Cord” p.12
• What kind of load cables should I use?
→
“Load Cables” p.19
• How do I ensure stable voltage when the
cables connected to the load are long (the
distance to the load is long)?
→
“Sensing”
p.23
• How do I rack mount the PWX series?
What kind of parts are needed?
→
“Rack Mounting”
p.16
• How do I use remote sensing to stabilize
the PWX series?
→ “Sensing”
p.23
• How do I set the protection functions to
prevent damage to the load?
→ “Protection Functions and Alarms”
p.36
• After a protection function has been acti-
vated, how do I restart tests automatically
when the cause of the alarm is fixed?
→ “Alarm occurrence and clearing alarms”
p.36
• How do I set the communication condi-
tions for remote control?
→ See the Communication Interface Man-
ual on the CD-ROM.
–
• How do I check the settings in preset
memory?
→ “Recalling preset memory entries”
p.56
• How do I reset the PWX series to its fac-
tory default settings?
→ “Factory Default Settings (Initialization)”
p.59
• How do I use the multichannel (VMCB)
function to construct a multichannel power
supply system?
→ See the Communication Interface Man-
ual on the CD-ROM.
–
• How do I use the PWX series as a con-
stant voltage power supply (CV mode)?
→ “Using the PWX series as a CV or CC
Power Supply”
p.35
• How do I use the PWX series as a con-
stant current power supply (CC mode)?
• How do I operate the PWX series at a
specific current? How do I save current
values to the preset memory?
→ “Preset Memory Function”
p.55
• How do I control the output voltage with
an external DC voltage?
→ “Overview”
p.62
• How do I monitor the output voltage and
output current?
→ “External Monitoring”
p.75
• How do I use parallel operation to
increase the current capacity?
→ “Master-Slave Parallel Operation”
p.78
• How do I prevent the settings from being
changed?
→ “Locking Panel Operations (Key lock)”
p.57
• How do I clean the PWX series? → See the included “Safety Precautions”
document, or the electronic version of
the document on the CD-ROM.
–
• How do I calibrate the PWX series? → “Calibration” p.90
Preparation
Setup
Operation
Maintenance