manualshive.com logo in svg

Kikusui PLZ1004W, User Manual, Page: 8 / 216

Share
Download
Kikusui PLZ1004W User Manual Download Page 8

1-2  General Information

PLZ-4W

1.1

About This Manual

This operation manual covers the following PLZ-4W Series Electronic Loads.

Product version covered

This operation manual covers electronic loads with ROM version

 1.3x

. 

When contacting us about the product, please provide us the following information.

• Model

• ROM version

• Manufacturing number (indicated at the lower section on the rear panel)

For the procedure of confirming the ROM version, see section 2.7, ?Checking the
ROM Version.”

1.2

Product Overview

The PLZ-4W Series Electronic Load is a multifunctional system designed to offer
the highest levels of reliability and safety. The electonic load contains a stable and
high-performance current control circuit that enables high-speed load simulations.
In addition, its CPU control feature works to improve operability and multifunc-
tional capability.

The high-precision current settings provide you with sufficient resolution.

Because the electonic load comes standard with GPIB, RS232C, and USB commu-
nication functions, it can easily be incorporated into wide-ranging test and inspec-
tion systems.

• PLZ164W

• PLZ164WA

• PLZ334W

• PLZ664WA

• PLZ1004W

Summary of Contents for PLZ1004W

























































































































































































































Reviews:

No comments