manualshive.com logo in svg

Kikusui PLZ1004W, User Manual, Page: 18 / 216

Share
Download
Kikusui PLZ1004W User Manual Download Page 18

2-2  Installation and Preparation

PLZ-4W

2.1

Checking the Package Contents

When you receive the product, check that all accessories are included and that the
product and accessories have not been damaged during transportation.

If any of the accessories are damaged or missing, contact your Kikusui agent or dis-
tributor.

• It is recommended that all packing materials be saved, in case the product needs to

be transported at a later date.

Fig.2-1

Accessories

NOTE

Load input terminal cover (1 pc.)
Lock plate (2 pcs.)

J1/J2 protection dummy plug (2 pcs.)
[Attached to the product.]

Set of screws for the load input 
terminal (2 sets)

Power cord
(1 pc.)

 [Q1-500-085]

 [P2-000-228]

[M1-100-012]

[M5-101-007]

[M4-100-007]

[84-49-0071]

or

or

Setup Guide (1 pc.)

Quick Reference
(Japanese 1sheet, English 1sheet)

CD-ROM (1 pc.)

Plug: NEMA5-15
Rating: 125 Vac/10 A
[85-AA-0003]

Plug: CEE7/7
Rating: 250 Vac/10 A
[85-AA-0005]

Plug: GB1002
Rating: 250 Vac/10 A 
[85-10-0790]

The power cord that is provided varies depending on the 
destination for the product at the factory-shipment.

Summary of Contents for PLZ1004W

























































































































































































































Reviews:

No comments