Kikusui PLZ1004W, User Manual, Page: 56 / 216

4-12 Names and Functions of Parts PLZ-4W
4.4 Display
You can change the display contract by turning the rotary knob while holding down
the SHIFT key. The contrast setting is backed up even when the power is turned off.
Fig. 4-7 Display
[1] Range display
Displays the current and voltage range.
[2] Status display
Displays (from the left) the lock, remote, and rotary knob coarse/fine adjustment
status.
[3] Measured value display
Displays the measured values of current (A), voltage (V), and wattage (W).
[4] Operation status display
Displays the current operation mode when the load is turned on.
[5] Elapsed time display
Displays the elapsed time since the load was turned on.
By factory default, the elapsed time display (Count Time) is turned off (not shown).
To show the elapsed time, turn it on from the menu settings. You can also automati-
cally turn off the load after a specified time elapses after the load is turned on (Cut
Off).
•
For details of menu setup, see section 5.13, “Menu Setup.”
[6] Operation mode display
Displays the specified operation mode.
[7] Setup display
Displays the basic setting in the specified operation mode.
[8] Multi display
Displays various settings and current status according to the condition.
0.00
mA
0.000
V
0.000
W
CC
SLEWRATE
0:06:23
0.000
A
0.01
mA/μs
SET
H 33A 150V
R
C . C
[1] Range display [2] Status display
[3] Measured value display
[5] Elapsed time display
[7] Basic setting display
[8] Multi display
[4] Operation status display
[6] Operation mode display
H 33A 150V
SLEWRATE
0.01
mA/μs
R
0.00
mA
0.000
V
0.000
W