Kikusui PLZ-4W Series, User Manual

Page: 43 / 218

PLZ-4W For First Time Users 3-5
■
Pop-up menu operation
Some keys show a pop-up menu when you press the key. If you press the key again
while the menu is shown, the selected item switches. Each time you press the key,
the selected item switches one by one to the next item. When you
fi nish the key
operation, the item at that point is selected, and the pop-up menu automatically
clears.
■
How to use the SHIFT key
The SHIFT key is used to switch the function of each key. If you press a key without
holding down the SHIFT key, the function indicated above the key is enabled; if you
press a key while holding down the SHIFT key, the function indicated below the key
is enabled.
For example, if you press the SET/VSET key without holding down the SHIFT key,
the SET/VSET (indicated in black) function is enabled. If you press the SET/VSET
key while holding down the SHIFT key, the MENU (indicated in blue) is enabled.
This manual denotes the operation of holding down a key while holding down the
SHIFT key as SHIFT+(notation above the key). For example, when selecting the
MENU key, this manual denotes it as MENU (SHIFT+SET/VSET). In this case,
press the SET/VSET key while holding down the SHIFT key.
Saving the setup conditions
You can use the memory function to save the settings that you are using. The ABC
preset memories can save three separate sets of settings of each range of each oper-
ation mode. The setup memory can save 100 sets of the current setup condition and
the contents of the ABC preset memories in that condition. The information saved to
the memory is backed up even when the power is turned off (the information is
saved until the PLZ-4W is initialized).
•
For a description of the ABC preset memories, see section 6.1, “ABC preset
memories.” For a description of the setup memory, see section 6.2, “Setup
Memory.”
• For a description of initialization, see section 5.14, “Initialization.”
Performing waveform simulation
The sequence function is used to perform waveform simulation. The sequence func-
tion automatically executes the time change of the waveform speci
fi ed arbitrarily
one operation at a time. The program information that you create is backed up even
when the power is turned off.
•
For a description of the sequence function, see section 6.6, “Sequence Func-
tion.”
Maintenance and transportation after use
Before performing maintenance work, be sure to turn off the power and remove the
power plug from the outlet or the power cord from the PLZ-4W.
•
For details on maintenance, see chapter 8, “Maintenance and Calibration.”
• If the PLZ-4W requires repairs or readjustment, do not open the
outer cover by yourself. Contact your Kikusui agent.
• When transporting the PLZ-4W, remove the power cord and cables,
and use the original packing materials.
0.00
mA
0.000
V
0.000
W
CC
SLEWRATE
0.000
A
0.01
mA/
μ
s
SET
H 33A 150V
CP
CC
CR
CV
Pop-up menu