Kikusui PFX2500 Series, Operation Manual

Page: 31 / 144

PFX2512
31
Connecting the Devices
2
C
o
nn
ec
ting
an
d C
o
nfigurin
g Devic
e
s
Constructing cables
p. 21
Make the cables as short as possible by considering the loss in the cables according to your system
configuration.
p. 30
1
Select the appropriate cable.
2
Attach an M6 solderless terminal to the PFX2512 end of the cable.
See
See
CAUTION
If the DUT will be subject to high temperature, such as by placing it in a temperature chamber, pay
attention to the allowable temperature of the DUT cable. If the heat resistance of the DUT cable
and the like is insufficient, the DUT will be in a dangerous situation due to poor insulation,
increased contact resistance, and so on.
• The cable can be extended up to 5 m. If the cable is longer than 5 m, constant current control
may become unstable, or accurate capacity measurement may be compromised.
• To prevent incorrect wiring, use different color solderless terminals or cables to make the
polarities easily distinguishable.
Example of connecting figure of the charge / discharge system with the DUT (battery)
–
+
J1
J2
–
+
PFX2512
EXT CONT
–
+
–
+
–
+
+S
-T
-S
+T
–
+
FG
DC OUTPUT
DC INPUT
Options are available.
PWR-01 DC power supply I/F cable (SC07-PFX)
PLZ-5W Electronic load I/F cable (SC05-PFX)
DUT cable and voltage/temperature sensing cable
(TL08-PFX)
*
*
*
*
*
*
*
I/F cable for Electronic load
I/F cable for DC power supply
DC power supply
Electronic load
Sensing connector
Electronic load
connector
DC power supply
connector
Voltage sensing cable
Temperature sensing cable
DUT cable
DUT cable
Thermistor
(included)
DUT
(battery)
Cable with solderless terminal
(included)
Input/Output terminal board
DC PS
Input/Output terminal
board
DC EL
Input/Output terminal
board
DUT
Cable with solderless terminal
(included)
Cable with solderless terminal
(included)
Cable with solderless terminal
(included)