Kikkoman Lumitester Smart Instruction Manual Download

Page: 1 / 23

About Lumitester Smart

Ready-to-use application "Lumitester"

Instruction Manual

Easy to use.



Power ON

(press & hold)



Insert the reagent



START

It assists setup for the measurement target depending on the industry.

The measurement

result and

pass/fail at the

measurement

point can be

easily understood.

Lumitester Smart

Anyone can immediately start hygiene management.

Measure!

Start!

Recommended list of

measurement targets

in the kitchen

choice!

Choice!

Thank you very much for purchasing our product.
This Instruction Manual must be read carefully to operate
this product safely and properly.
This Instruction Manual should be kept for future reference.

Measurer : User Name

Test date : 2019.01.23.09:00

Bench mark value 1 (Pass) 200
Bench mark value 2 (Caution) 400

Pass

kitchen knife

Result

Select the measurement

point and start

measurement with the

application.

Summary of Contents for Lumitester Smart
























Search results

Summary of Contents for Lumitester Smart

Reviews:

Related manuals for Lumitester Smart

Brands by name

Popular brands

Kikkoman Lumitester Smart, Instruction Manual

Search results

Summary of Contents for Lumitester Smart

Reviews:

Related manuals for Lumitester Smart

Brands by name

Popular brands