KIKKA BOO TIARA, Instructions For Use Manual

Page: 7 / 51

ENGLISH
FRONT WHEELS DIRECTION UNIVERSAL AND FIXING
3.4.To fix the direction of the front wheels, align front wheels in a straight forward position and press down the front wheel lock, the front wheels can
only move straight forward and backward.
3.5. Front wheel universal rotation: Lift up the front wheel direction lock, directionof the front wheels can be universal.
IV. SEAT INSTALLATION
4.1. Lift up the seat: Press the button on the sleeping basket at the same time. Make sure the seat pivot latches on both sides are locked simultaneously
into the frame seat posts. Push up until you hear an audible “click” to indicate the seat is installed in place.
4.2. Fixed the sleeping basket: Surround the steel rod with straps and lock the snap fastener, make sure it locked tightly when you use
the stroller.
4.3. Armrest Installation: Insert the armrest into the sleeping basket slot, then it is completed.
V. SLEEPING BASKET ADJUSTMENT
In order to avoid injury, when the baby sitting on the seat , do not move or adjust the basket.
Sleeping basket adjustment button: Press the round buttons on both sides, rotate the sleeping basket to adjust the seat position.
5.1. Lying Status; 5.2. Leaning Status; 5.3. Sitting Status;
5.4. Change the sleeping basket to sitting status.
5.5.Tighten the steeples adjustment belt, adjust the backrest angle. It will be changed to the sitting position.
VI. ONE TOUCH BRAKE
6.1. Press the rear wheel brake axle, the rear wheels will be locked, unable to move.
6.2. Lift up the rear wheel axle to release the brake, then the stroller can move freely. The locking status, the stroller unable to move.
VII. ONE KEY FOLDING
7.1.Double lock folding system: This stroller use double lock folding system to prevent accidental hurt to the baby.
7.2. One key folding process: Slide the second locking key with your right hand thumb, while press the other key with the index finger and middle
finger. Push down the frame to fold the stroller. Lock the folding key to prevent the stroller accidentally open.
7.3. Folding status 1: Folding hook
7.4. Folding status 2: Lock the folding hook
VIII. FIVE -POINT SAFETY BELT
8.1. Insert the arm safety belt into the waist belt buckle.
8.2
.
Then lock it into the main buckle with the red button .
8.3
.
Press the red button to unlock the safety belt.
IX. CARE AND CLEANING
Fabric parts: The fabrics of the product must be cleaned with warm water and mild soap.
Plastic and metal parts:
1. The plastic and metal parts must be cleaned with a damp soft cloth and dried with dry soft cloth.
2. Do not let the product exposed to the harmful effect of external factors - direct sunlight, rain, snow or wind. This may lead to damage of the metal
and plastic parts and fading of the fabrics of the crib.
3. When you are not using the product, store it at a dry and well ventilated place, not in dusty, humid premises with very high or very low room
temperatures.
Frame: From time to time check all plastic parts that are hanged on the frame. Tighten all screw and bolts if necessary.
• For dust and general stains, it is recommended to use a wet cloth to scrub quickly and dry quickly.
• The seat cloth and the sunshade canopy are not machine washable.
• In order to avoid damage to the fabric surface, Do not brush the fabric with force. Put the fabrics in a ventilated place to dry after washing, do not
expose.