Revised on 03/28/22 Copyright © March28th, 2022 by Kifco
®
Inc.
17
Important
When using the automatic water shutoff feature, be sure the water can be shut off au-
tomatically without damaging the water supply or the Water
-
Reel! Stopping the flow of
water can damage a pump or water lines and excessive pressure can be created. A qual-
ified person should confirm if you could safely utilize the automatic water shut
-
off.
Water
-
Reel Start
-
Up & Operation
12.
Observe water pressure, travel speed, and sprinkler performance to confirm desired performance. See per-
formance guide supplied with the machine.
Turbine Drive Only
On initial start up, adjust lock nut (#3) on travel control screw. To adjust, turn speed control knob out until a no-
ticeable pressure change has occurred (approximately 10 PSI). Once this is reached, screw lock nut to face of
plate (nut is not used to lock screw, only to prevent over speed).
1. Speed Control Knob
2. Knurled nut, used to lock travel control
screw.
3. Lock nut, used to prevent excessive
pressure loss though turbine.
1.
2.
3.
Note:
Some municipalities prohibit the use of water mains intended for fire protection and there may also be
requirements for back
-
flow prevention. Investigate and obey all local regulations regarding the use of water
.
Note: On completion of first run only!
Verify the Transport Boom is directly above the Bumper on the Sprinkler
Cart Body. If it is not in alignment; loosen the mounting bolts and move the Transport Boom to its proper loca-
tion.
Verify Bumper on Sprinkler
Cart Body is directly below
the catch on the Transport
Boom
Transport Boom
