Revised on 03/28/22 Copyright © March28th, 2022 by Kifco
®
Inc.
16
Water
-
Reel Start
-
Up & Operation
10.
Re
-
engage the Clutch Disengage Knob by turning it back 90° letting the split pin rest in the deeper groove
of the clutch housing.
NOTE:
In some instances the Clutch Disengage Knob will not fully set back into the
groove. This is due to the pin resting on the bar on the Clutch Dog located behind the sprocket. Once the tur-
bine is engaged, the sprocket will begin turning and the Clutch Disengage Knob will drop into its full oper-
ating position.
Rotate the Pawl Stop Plate out from underneath the Anti Return Pawl handle. The Anti Return Pawl will
now be in its proper operating position.
Pull and rotate Clutch Disengage
Knob 90° to engage drive system
Rotate Pawl Stop Plate to release
the Anti Return Pawl handle
11.
Pull the handle on the Shut Off Bar slightly back then simultaneously push down on the Shut off Hold Out
handle. Slowly release the Shut Off Bar handle to begin water flow through the turbine runner.
Pull back Shut Off Bar Handle
Push down on the Shut Off Hold Out handle and
SLOWLY release the Shut Off Bar Handle
