Technical data sheet 1.15-10.002-01-en
Multi radio connection MFA
D e v i ce De s c ri p ti on
Installation
Warning supply voltage 230 V for MFA multi-radio connection!
Danger
Electrical installation of the device connection may only be performed by qualified expert
personnel (e.g. electricians)!
In this context, the regulations of the VDE (Association of German Electrotechnical Engineers) as well as the local
regulations are to be observed.
The devices shall be connected according to the terminal connection diagram or the applicable appliance
connection scheme.
Connection
MFA
Use only small servo drives with DC power supply.
Note
Addressing
In the housing, the MFA has 3 rotary switches for
setting the system code and the device address.
By means of the 3-digit address code, radio paths
can be established with theoretically up to 999
participants.
Terminals small
servo drives
Service key
multi-colored LED
2x address rotary switch
Rotary switch system code
Terminals 230 V AC
Note
The address code at the FCE must match the setting of the corresponding transmitting module (e.g.
TC12) so that an unambiguous allocation between transmitter and receiver of the radio path is
determined.
Page 6 / 8
