Page 13 / 14
MD15-C, MD15-HR, MD15-DA
Product Description
3.09-20.115-01-EN | 2019-08-12
Q
Manual adjustment
!
CAUTION
Manual adjustment may only be performed when the actuator is installed.
►
Disconnect the actuator from the power supply.
►
Fold the cover nipple to the side.
►
A hexagon key (key socket 4 mm) can be used to move the
actuator into any position.
!
CAUTION
If you manually adjust until the slip clutch responds, turn the hexagon key half a turn in the opposite
direction after the manually set stroke position has been reached.
NOTE
An initialization run must be performed after a manual adjustment.
This occurs during operation when a valve end position is reached as part of normal operation.
You can perform this initialization manually by actuating switch 6, see p. 15.
