A
Page 3 / 10
Datasheet 3.50-32.020-01-EN
DS230/4..32 Actuating Drives
Product Description
Item
Technical Data
Accessories (not included in delivery)
DS230/4
AC 230 V actuating drive with 4 Nm torque
DS230/8
As above, but with 8 Nm torque
DS230/16
As above, but with 16 Nm torque
DS230/24
As above, but with 24 Nm torque
DS230/32
As above, but with 32 Nm torque
DS230/../E
Data same as for DS230/4..32, but with 2 adjustable auxiliary switches
DS230/../R1/1000
Data same as for DS230/4..32, but with feedback potentiometer 1 k
Ω
Nominal voltage
AC 230 V
Power consumption
In operation
In end position
DS230/4 4.0 W; DS230/8..24 5.0 W; DS230/32 5.5 W
DS230/4 3.0 W; DS230/8..24 0.5 W; DS230/32 1.0 W
Control
2-point or 3-point signal AC 24 V (open/close or open/stop/close)
Position indication
Scale on actuating drive
and DS230/../R1/1000 over feedback potentiometer 1 k
Ω
Torque
DS230/4
DS230/8
DS230/16
DS230/24
DS230/32
4 Nm for damper surface area up to 0.8 m²
8 Nm for damper surface area up to 2 m²
16 Nm for damper surface area up to 4 m²
24 Nm for damper surface area up to 6 m²
32 Nm for damper surface area up to 8 m²
Rotational angle
0 to 90° working range, invertible rotational direction
DS230/4
Rotational angle limitation: 0 to 30° and 60° to 90° pos-
sible
DS230/8..32
Rotational angle limitation: 5° to 85° in 5° increments
possible
Run time
DS230/4
DS230/8
DS230/16
DS230/24
DS230/32
35 s for 90° rotational angle
30 s for 90° rotational angle
80 s for 90° rotational angle
125 s for 90° rotational angle
140 s for 90° rotational angle
Auxiliary switches
DS230/../E 2 adjustable auxiliary switches, AC 230 V, 3 (1.5) A, deliv-
ery setting: 10° and 80° rotational angle
Potentiometer
DS230/../R1/1000 feedback potentiometer 1 k
Ω
; 0.5 W, ±10%
Degree of protection
DS230/4
DS230/8..32
IP42 (IP44 with M16 x 1.5 screw fitting)
IP54 (cable at the bottom)
Ambient temperature
-20 °C to +50 °C
Ambient humidity
5 to 90% r.h., non-condensing
Weight
DS230/4 0.95 kg; DS230/8..32 1.2 kg
ZKGH
Only for DS230/8..32: one actuating lever with centering pin and two KG8 ball joints
