Figure 3.9
Figure 3.8
12
Screw and nut are needed for
this step.
ATTACH THE STEERING WHEEL
❶ Remove the screw and nut from the steering wheel.
Figure 3.8
❷ Connect the wires coming from the steering wheel opening
on the dashboard with the wires coming from the bottom of
the steering wheel.
❸ Orient the steering wheel in an upright position, and insert
the steering wheel into the opening.
❹ Completely align the holes at the end of the steering rod
with the holes in the steering wheel base. Figure 3.9
❺ Insert the screw through the hole in the steering wheel and
steering rod.
❻ Fasten the nut on the end of the screw and tighten the nut.
2
4
5
6
1
3
Summary of Contents for Mercedes ML 5F60AD7
Page 25: ......
