11
ATTACH THE WHEELS
❶ Slide the inside washer onto the axle until it meets the stop
on the axle. Note: the rear wheels do not get an inside
washer for this step. Figure 3.7
❷ Slide a wheel onto each axle until it stops at the washer.
IMPORTANT: The rear wheels have a gear shape that fits
into the gear box. The front wheels do not have the gear
shape on the back side.
❸ Insert the outside washer onto each axle until it stops at
the wheel.
❹ Insert the retaining nut over the end of each axle.
Tighten the retaining nut using the hex wrench provided in
the hardware packet.
❺ Align the five tabs on the back of the hubcap with the slots
in the wheel, and push the hubcap into the wheel until it
snaps into place.
1
Figure 3.7
2
4
5
Back side of the
rear wheels fit into
the gear box.
Tip!
The inside washer is larger than the
outside washer.
Front wheel
assembly
2
3
Rear wheel
assembly
4
5
3
Summary of Contents for Mercedes ML 5F60AD7
Page 25: ......