Install the Steering Rod
1.
Place the vehicle on soft material
that will protect it from scratching
or damage. Carefully turn the
vehicle onto its side.
Note:
It is helpful to have a second
person assisting you with these
steps.
2.
Insert the short end of the Steering
Rod through the bracket hole of the
front axle.
3.
Insert the long end of the steering
rod up through bottom of the car
body, and into the dashboard.
Attach the Steering Wheel
4.
Attach the connector from the
Steering Wheel into the connector
in the Dashboard.
5.
Remove the steering wheel screw
and nut from the Steering Wheel.
6.
Insert the Steering Wheel base over
the Steering rod, sliding the tab on
the steering wheel base into the
pocket on the Dashboard.
Note:
The Tab on the back of the
Steering Wheel column should be
facing up.
7.
Align the holes of the steering
wheel and steering rod.
8.
Insert the screw you removed in
step 6 completely through the
Steering Wheel and Steering Rod.
9.
Fasten the nut onto the opposite
side of the screw and tighten.
9
Steering rod
completely inserted
Steering rod
Steering wheel tab
1
2
2
3
3
4
6
8
7
9
