Screw holes
Attach the Car Doors
1.
Slide the bottom of the car door hinge
into the car hinge pocket until the steel
plate rests on the recessed area of the
car body.
2.
Align the holes of the steel plate with
the screw holes on the recessed area
of the car body.
3.
Fasten the plate to the car body using
2 medium screws. Do not over tighten.
4.
Repeat steps 1-3 to attach the
opposite door.
Car hinge
Make the Dashboard
Connections
1.
Plug the Megaphone into the
megaphone port located underneath
the Dashboard.
2.
Attach the connector under the
Dashboard to the connector on the
car body, located at the top of the
black, middle stripe.
Note:
The connector’s may have
slipped inside the Dashboard
assembly during shipment, if so,
gently pull the connector out.
Three-prong
connector
attaches to the
steering wheel
Megaphone Port
The
two-prong
connector attaches to the
car body, and the
three-prong
connector
attaches to the steering wheel. Do not
connect the steering wheel at this time.
Tip!
7
Recessed area
of car body
2
3
1
1
2
