16
“Movement is life!”
Figure 20: Hip Angle Positions
VI. OPERATING INSTRUCTIONS
B. HIP ANGLE ADJUSTMENT
1. Verify that the chair is locked in the non-ACTIVE position. See the operating
instructions for the ACTIVE Handle in part H of this section.
2. While supporting the child’s weight, lift up on the hip angle adjustment lever.
3. Move the back of the chair to the desired position and release the lever.
4. Verify that the lever handle clips over the bolt [A].
Figure 21: Adjusting the Hip Angle (Unlocked)
Recline lever in unlocked position
Recline lever in locked position
A
A. WHEEL LOCK ENGAGEMENT
1. To lock the wheels, push the wheel lock lever downwards and roll the pushchair
slightly back or forward, so that the lock pins can engage into the brake disk.
Never use force! This could damage the quick releases and the wheels could fall
off and cause injuries.
2. To disengage the wheel lock, pull the wheel lock lever upwards with your toe.
Figure 18: Engaging wheel lock
Figure 19: Disengaging wheel lock
SAFE
WARNING: Always inspect your chair before placing your child into it. Look for
loose parts, sharp edges, hot surfaces, detached harnesses, mechanisms that are not
fully engaged, and any other hazards. Always engage the wheel locks before per-
forming a transfer of the child to or from the chair. Read this instruction manual
before using this chair.
WARNING: Upon release of the lever, verify that lever
returns to the down (locked) position. This indicates
safe engagement.
Figure 22: Adjusting the Hip Angle (Locked)
