60
Hardware
C:
Place Roof Spacer Assembly from Step 18, on top of the Small Roof Assembly, flush to the edge as shown in
fig. 19.5.
D:
Measure 1/2” in from the edge and 7” up from the bottom of each (211) Small Roof Panel and mark. Follow
with 11” up from the first mark and then 11” up from the second mark. Pre-drill with a 1/8” drill bit at all 6 marks.
(fig. 19.6 and 19.7)
E:
Attach Roof Spacer Assembly to Small Roof Assembly with 3 (S3) #8 x 2-1/2” Wood Screws per side. (fig.
19.6 and 19.7)
6 x
#8 x 2-1/2” Wood Screw
Step 19: Small and Large Roof Assemblies
Part 3
Fig. 19.5
211
Fig. 19.6
Fig. 19.7
211
7”
11”
11”
1/2” Screw to
Panel End
Roof Spacer Assembly
Roof Spacer Assembly
Flush
x 3 per side
S3
S3
Summary of Contents for F23175
Page 111: ...111 NOTES...
