KidKraft BLOOMFIELD F29180, Installation And Operating Instructions Manual

Page: 24 / 64

24
5/16” Flat
Washer
5/16” Flat
Washer
5/16”
Lock Nut
Swing Hanger x 6
Fort End
Fig. 4.1
G7
2614
Step 4: Swing Beam Assembly
Hardware
A: Attach 6 Swing Hangers to the (2614) Engineered Beam using 2 (G7) Hex Bolts (with 2 flat washers and 1
lock nut) per Swing Hanger as shown in fig. 4.1.
B:
Flush to the Fort End of (2614) Engineered Beam attach 2 L-Beam Brackets with 2 (G21) Hex Bolts (with 2
flat washers and 1 lock nut). (fig. 4.2)
C: Install 1 (WB7) Wafer Bolt (with flat washer and t-nut) in the middle bolt hole in (2614) Engineered Beam
as shown in fig. 4.3. IT IS IMPORTANT THAT THIS BOLT IS ATTACHED. IT WILL MINIMIZE CHECKING OF
WOOD.
D:
Attach KidKraft Plaque to centre of (2614) Engineered Beam (over top of t-nut) using 4 (S18) #6 x 1” Wood
Screws. (fig. 4.4)
12 x Hex Bolt (5/16” flat washer x 2, 5/16” lock nut)
2 x Hex Bolt (5/16” flat washer x 2, 5/16” lock nut)
1 x Wafer Bolt (5/16” flat washer & 5/16” t-nut)
4 x #6 x 1” Wood Screw
Other Parts
6 x Swing Hangers
2 x L-Beam Bracket
1 x KidKraft Plaque
G21
Wood Parts
1 x Engineered Beam 76.2 x 133.4 x 2235.2mm
G7
WB7
2614
G21
5/16” Flat
Washer
L-Beam
Bracket
5/16”
Lock Nut
Flush
5/16” Flat
Washer
L-Beam
Bracket
Fort End
Fig. 4.2
2614
x 4
KidKraft Plaque
Fig. 4.4
S18
S18
5/16” Flat
Washer
5/16”
T-Nut
WB7
Fig. 4.3
2614