2 / 2
P/N 3102575-
EN • REV 001 • ISS 02MAR18
Figure 3: Wiring diagram
Note:
Refer to the KI-HDT User Guide (P/N 3102576-EN) for instructions on
using the tool to initialize a loop, troubleshoot, and using the PC
software. A copy of the guide can be found on the USB flash device or
online at www.my-eddie.com.
Figure 4: KI-HDT Activities LED
(1) Communication LED (Flashing green LED)
(2) Charging LED (Solid red LED)
Maintenance
Please see www.my-eddie.com for any firmware updates.
Specifications
Voltage
5 VDC
Battery
Type
Replace with
3.6V,2200mAh Lithium-Ion
50mm x 37mm x 10.5mm
P/N HDT-BATT
Wire size
12 to 26 AWG (1.31 to 0.13 mm²)
Dimensions (W × H × D)
5.25 × 3.25 × 1.75 in.
(133.3 × 82.5 × 44.5 mm)
Operating environment
Temperature
Relative humidity
32 to 120°F (0 to 49°C)
0 to 93% noncondensing
Regulatory information
FCC compliance
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Environmental
class
IEC: 3K5 (Indoor use only)
Battery directive: This product contains a battery
that cannot be disposed of as unsorted municipal
waste. The battery is marked with this symbol,
which may include lettering to indicate cadmium
(Cd), lead (Pb), or mercury (Hg). For proper
recycling, return the battery to your supplier or to
a designated collection point. For more
information see: www.recyclethis.info.
Contact information
For contact information, see www.kiddelifesafety.com
Notes
(1) Shield, if used, must be continuous and free from earth
ground.
(2) Data circuits are Style 4 (Class B)
(2)
(1)
(2)
