![background image](http://html1.mh-extra.com/html/kidde/i9070ca/i9070ca_user-manual_1965298015.webp)
Battery Removal
NOTE: If battery tamper resist feature has been activated it will
need to be deactivated in order to change the battery. Refer to the
Battery Tamper Resist Feature
section for instructions.
To replace or install the battery press down on the battery door
and then release to allow the door to pop open. The battery can
then be pulled out (Image 5). When installing a new battery, make
sure the battery terminals are facing outwards as illustrated inside
the battery door and that the polarity matches the markings
printed. Completely press the battery door down into the alarm
and release. The battery door will secure into the closed position.
A missing or improperly installed battery will prevent the battery
door from closing and result in improper alarm operation.
This alarm has a low battery monitor circuit which will cause the
alarm to “chirp” approximately every 30-40 seconds for a
minimum of seven (7) days when the battery gets low. Replace
the battery when this condition occurs.
Maintenance
14
BATTERY DOOR OPERATION
IMAGE 5