LaserNET Program User's Guide
September 2003
TM0048
6-21
6-8.3
Saving a Configuration to File
The save procedure is the same, whether on-line or off-line.
1. Select
File
>
Save Config
. The Configuration Save window opens, as shown in Figure 6-26.
Figure 6-26. Configuration Save Window
2. The file name to be saved will be shown in the File Name field. For IIM or Direct Connection, the default
file name is *.CFG. To save with a different file name, select the desired file name from the Files box and
it will appear in the File Name field. The file name must end with a *.cfg extension.
3. The directory where the file will be saved is displayed in the Save In box. To change directories, view all
directories in the Directories box and double-click on the desired directory. It is recommended that each
job site be saved to a separate directory to avoid confusion.
4. Select
<OK>
to save the configuration. A confirmation window will open showing the drive\directory\file
name to be saved. Select
<OK>
to save.
6-9
SOFTWARE VERSION
The LaserNET software version and the Detector's embedded software versions can be displayed through
LaserNET.
1. Select
Options>Software Version
. The Software Version window opens (Figure 6-27).
Figure 6-27. Software Version Window
Summary of Contents for HART XL
