background image

Important Warning Statements

     WARNING: This product is intended for use in ordinary indoor 

locations of family living units. It is not designed to measure  

compliance with commercial or industrial standards. It is not 

suitable for installation in hazardous locations as defined in your 

local building code.

The installation of this device should not be used as a substitute 

for proper installation, use and maintenance of fuel burning 

appliances, including appropriate ventilation and exhaust 

systems. It does not prevent CO from occurring, nor can it solve 

and existing CO problem.

     WARNING: This device is designed to protect individuals from 

acute effects of carbon monoxide exposure. It may not fully 

safeguard individuals with specific medical conditions. If in doubt, 

consult a medical practitioner.

Individuals with medical problems may consider using warning 

devices which provide audible and visual signals for carbon 

monoxide concentrations under 30 PPM.

This carbon monoxide alarm requires a continuous supply of 

electrical power – it will not work without power.

Contents of This User’s Guide

1. 

Information About Carbon Monoxide

2. 

Product Features and Specifications 

3. 

Installation Locations

4. 

Installation Instructions 

5. 

C3010-CA Operating Characteristics 

6. 

C3010-D-CA (with digital display) Operating Characteristics 

7. 

Alarm Characteristics 

8. 

Maintenance 

9. 

Limited Warranty

!

!

Summary of Contents for C3010-CA




















Reviews: